Choosing the Right LED Aluminium Profile?

LED strip lighting, ribbons or tapes are becoming one of the most popular LED products available. They will did not only replace incandescent ribbons, but some of the fluorescent tubes as well, and definitely gave endless options for commercials and decoration of bars, hotels, as well as other public areas. With all the fast advancement the LED technology, these are now available in very bright versions too, allowing users to apply it as task, or in rare situations, even as a main way to obtain lighting. Their application is popular both in home and commercial use, therefore we all collected the main characteristics of strip lights consumers need to consider if they want to make the right choice. Follow the link for more information about LED Aluminium Profile.

Depending on our purposes the following features may help people decide what we have to utilize.

- The size or type of LED integrated
- the number of LEDs in just a metre of the strip
- the colours or colour temperatures of the LEDs
- the flexibility of the strip
- the direction of LEDs on the strip
- carrying capacity - heavy duty
- IP rating
- Voltage
- dimmers and controllers

Of all the determining factors mentioned above, the most important is probably the type and size of the LED integrated, both of which determine its brightness or performance. This difference was already discussed in one of our own previous articles on ArticleBase. apresentando: how the performance of different LED technology (low strength, SMD strength and high power) ranges, and also the size of the diodes. Obviously, the more recent the technology of the LED is, and the bigger its size is, the brighter it will probably be.

One more determining factor of the performance is of course the number of LEDs in the line in just a metre for instance. The greater this amount is, the brighter the line is, even though extremely high numbers in just a metre usually require special technology, like double width strips : where the LED are placed not just one after the other but in two or three rows next to each other. With strips including a high number of BROUGHT always check their particular arrangement, because LEDs placed too close to each other may produce too much heat and radically cut short the lifespan of the line.

The colour range of the LED is now endless, since any colour can be created with RGB technique. You can find generally two or three shades of white available: bright or cold white : the bluish, really bright version of white, the cozy white - which is rather yellowish like the sun, and the natural white - which is a combination of the 2 in various degrees. The temperatures of the white colour is measured in Kelvin, and the higher colour temperatures (from about 5000 K) are the cold, or bluish whites and the lower ones (2700 - 3000 K) are the warmer white colours.

One colour LEDs are available in almost all colours now, but the RGB BROUGHT strips can also emit a sizable selection of colours. RGB whitening strips need a controller to use, and decide whether or not the colour of the strip should be one constant colour, or should change along with setting the pace of transformation. Special pixel RGB strips are able to change the colour in a row, making a run-down result. The variety of colour changes of the RGB line largely depends on the knowledge of the controller too.

The flexibility of the LED whitening strips can be a determining factor in their particular application. Firm strips are perfect for replacing fluorescent tubes for instance, even though there is hardly anything you should not be able to do using a flexible line either. On flat surfaces it is sometimes easier to work together with rigid whitening strips, though applied on ceilings or walls - I assume many of you have encounter this problem before : what appears to be level for the eye is far from straight once examined using a spirit level. So , flexibility is more often a grace than a burden.
Whitening strips are usually flexible to one dimension only, which is exactly the lady the direction of the LEDs can be significant. The most common types of strips have got LEDs lighting upwards, so if for instance if you wish to enlighten a wheel you have to look for side-mounted or side-view strips to be able to shape them the right direction. For more info go to LED Bulbs.

Write a comment

Comments: 0